Grayledge Pump & Industrial-Chemcial Compatibility
Chemical Compatibility
Chemical Compatibility Tables
Chemical compatibility charts to aid in material selection are listed
The Masterflex Chemical Compatibility Guide
  • Material Data for: Pharmed, Norprene, C-Flex, Silicone, BioPharm,
    Sta-Pure, Tygon, Chem-Sure, Viton, PTFE, Polysulfone,
    Polycarbonate, Polyphenylene sulfide, Stainless Steel and
  • Compaibility with the following chemicals: Acetaldehyde, Acetate,
    Acetic Acid>5%, Acetic Acid>5%, Acetic anhydride, Acetone,
    Acetonitrile, Acetyl Bromide, Acetyl Chloride, Aliphatic
    Hydrocarbon, Aluminum Chloride, Aluminum Sulfate, Amyl Acetate,
    Amyl Alcohol, Amyl Chloride, Aniline, Aniline Hydrochloride, Aqua
    Regia, Aromatic Hydrocarbons, Arsenic Salts, Barium Salts,
    Benzaldehyde, Benzenesulfonic Acid, Bleaching Liquors, Boric
    Acid, Bromine, Butane, Butanol (Butyl Alcohol), Butyl Acetate,
    Butyric Acid, Calcium Oxide, Calcium Salts, Carbon Bisulfide,
    Carbon Dioxide, Carbon Tetrachloride, Chlorine (dry), Chlorine
    (wet), Chloroacetic Acid, Chlorobenzene,  Chlorobromoethane,
    Chloroform, Chlorosulfonic Acid, Chromic Acid 30%, Chromium
    Salts, Copper Salts, Cresol, Cyclohexane, Cyclohexanone,
    Diacetone Alcohol, Dimethyl Formamide, Essential Oils, Ethanol
    (Ethyl Alcohol), Ether, Ethyl Acetate, Ethyl Bromide, Ethyl Chloride,
    Ethylamide, Ethylene Chlorohydrin, Ethylene Dichloride, Ethylene
    Glycol, Ethylene Oxide, Fatty Acids, Ferric Chloride, Ferric Sulfate,
    Ferrous Chloride, Ferrous Sulfate, Fluoboric Acid, Flourborate
    Salts, Fluosilicic Acid, Formaldehyde, Formic Acid 25%, Freon
    TMS, Gasloline High Aromatic, Gasloline NonAromatic, Glucose,
    Glue PVA, Glycerin, Hydriodic Acid, Hydrobromic Acid 30%,
    Hydrochloric Acid Dilute, Hydrochloric Acid Medium, Hydrochloric
    Acid Concentrated, Hydrocyanic Acid, Hydrocyanic Acid Gas 10%,
    Hydrofluoric Acid 50%, Hydrofluoric Acid 75%, Hydrogen Peroxide
    Dilute, Hydrogen Peroxide 90%, Hypochlorous Acid, Iodine
    Solutions, Iodoform, Kerosene, Ketones, Lacquer Solvents, Lactic
    Acid 3-10%, Lead Acetate, Linseed Oil, LIthium Hydroxide,
    Magnesium Chloride, Magnesium Sulfate, Malic Acid, Manganese
    Salts, Mercury Salts, Methane, Methanol (Methyl Alcohol), Methly
    Chloride, Methly Ethyl Ketone (MEK), Molybedum Disulfide,
    Monoethanolamine, Naphtha, Natural Gas, Nickel Salts, Nitric Acid
    (dilute), Nitric Acid (medium), Nitric Acid (concentrated),
    Nitrobenzene, Nitrogen Oxides, Nitrous Acid, Oils (animal), Oils
    (mineral), Oils (vegetable), Oleic Acid, Oxalic Acid (cold), Oxygen
    Gas, Palmitic Acid (100% in ehter), Perchloric Acid,
    Perchloroethylene, Phenol (carbolic acid), Phosphoric Acid (50%),
    Phthalic Acid, Plating Solutions, Polyglycol, Potassium Carbonate,
    Potassium Chlorate, Potassium Hydroxide Solution, Potassium
    Hydroxide (concentrated), Potassium Iodide, Propanol (Propyl
    Alcohol), Pyridine, Silicone Fluids, Silicone Oils, Silver Nitrate, Soap
    Solutions, Sodium Bicarbonate, Sodium Bisulfate, Sodium Bisulfite,
    Sodium Borate, Sodium Carbonate, Sodium Chlorate, Sodium
    Chloride, Sodium Ferrocyanide, Sodium Hydrosulfite, Sodium
    Hydroxide (dilute), Sodium Hydroxide (25%), Sodium Hydroxide
    (concentrated), Sodium Hypochlorite (<5%), Sodium Hypochlorite
    (>5%), Sodium Nitrate, Sodium Silicate, Sodium Sulfide, Sodium
    Sulfite, Steam (up to 40 psi), Stearic Acid, Styrene, Sulfuric Acid
    (dilute), Silfuric Acid (medium), Sulfuric Acid (concentrated),
    Sulfurous Acid, Tannic Acid, Tanning Liquors, Tartaric Acid, Tin
    Salts, Toluene (toluol), Trichloroacetic Acid, Tricholoroethylene,
    Trisodium Phosphate, Turpentine, Urea, Uric Acid, Water (fresh),
    Water (salt), Xylene, Zinc Chloride.
The Cole Palmer Chemical Compatibility Guide
Provides information as to the suitability of the following materials to
various chemicals

  • ABS, Acetal (Delrin), Aluminum, Brass, Bronze, Buna-N,
    Carbon Graphite
  • Carpenter 20, Cast Iron, Ceramic AL203, Ceramic Magnet,
    Copper, CPVC, EPDM
  • Epoxy, Hastelloy-C, Hypalon, Hytrel, Kel-F, LDPE, Natural
    Rubber, Neoprene, Noryl
  • Nylon, Polycarbonate, PPS (Ryton), PTFE (Teflon), PVC,
    PVDF (Kynar), Silicone,
  • 304 SSS, 316 SS, Titanium, Tygon, Viton
The Chemical Compatibility Guide
Provides information as to the suitability of the following materials to
various chemicals

  • CPVC,EPDM, Nitrile , PP, PVDF, PVC, Teflon, Viton,
Flo-Cat's Chemical Compatibility Chart
© 2007 Grayledge Pump & Industrial
The NIBCO Corrosion Guide
Provides information as to the suitability of the following materials to
various chemicals

  • ABS, Aluminum, Aluminum Bronze,Alloy 20,Brass, Bronze (85%
    Cu), Buna-N
  • Carbon Steel,Copper, CPVC,Ductile Iron, EPDM, Fluorocarbon,
    Graphite,Gray Iron
  • Hastelloy C, Hypalon,Monel, Neoprene, 3% NiIron,Ni Plated
    Ductile, PEEK, 7-4 PH
  • PP, PVC , PVDF,316 SS, 400 Series SS, Teflon, Silicon Bronze
About Us
Contact Us
Technical Resources
Home | Place An Order | Set Up An Account |  Grayledge Web Rewards |
Product Info.