Terms
GRAYLEDGE
| Gilmont Size 0 Corrolated Flowmeters |
| Gilmont Size 0 Micro Flowmeter Models GF-1000, GF-1060 & GF-7060 The Gilmont family of Size Zero Flowmeters provide extremely accurate measurement of the flow rates of liquids and gases. Accuracy of this flowmeter is +/- 5% of reading or +/- 1 scale division, whichever is greater. The flowmeter comes with computerized calibration tables for various floats (either for air or water) at STP. Flow charts and formulas are also included to convert the scale readings for various liquids and gases. Flow analysis software to generate flow charts specific to the application is also available. Pricing on left. Delivery stock to 14 business days. flow range air 0.02 - 100 ml/min flow range water 0.002 - 1.1 ml/min max pressure unshielded 15 psi max pressure shielded 125 psi (if under 150F(65C) see temp. spec.) max pressure shielded with valves 125 psi (if under 150F(65C) see temp spec.) accuracy +/- 2% of reading or +/- 1 scale division whichever is greater repeatability +/- 1% of reading or +/- 0.5 scale division whichever is greater turndown ratio greater than 25:1 operating temperature range -15 to 150F (-26 to 65C) at max pressure rating, when operating above 150F(65C) the max pressure rating is reduced to 40 psig material flowtube borosilicate glass float ruby end blocks/stops PTFE inlet/outlet PTFE shield acrylic shield ends polypropylene valve PTFE, PCTFE, Glass o-rings Viton connections unshielded taper joints (see below) shielded 3/8" I.D. tubing shielded with valves 1/8" male NPT dimensions unshielded H = 7 1/2" OD = 5/16" shielded H = 10 1/4" OD = 1" shielded with valves H = 11" OD = 1 5/16" W = 6" Flowmeter Stand Kit and Stand Components The flowmeter stand kits includes an aluminum base with an integral bubble level (to insure perpendicularity of the flowmeter to the bench top for maximum accuracy) a mounting rod and two mounting clamps. model GF-4004 $321.00 flowmeter stand kit model GF-4001 $114.00 flowmeter base model GF-4002 $33.00 18" mounting rod model GF-4003 $96.00 mounting clamp Taper Joints and PTFE Coupling Adapters For unshielded flowmeters, taper joint sets are comprised of a male and a female joint with o-rings. model GF1121 $78.00 taper joint set for micro flowmeters 10/30 taper connection |
Specifications for the GF-1000, GF-1060 & GF-7060 Flowmeters
Model GF-1000 $178.75
(Unshielded)
Model GF-1060 $249.55
(Shielded)
Model GF-7060 $485.91
(Shielded with Valves)
(Unshielded)
Model GF-1060 $249.55
(Shielded)
Model GF-7060 $485.91
(Shielded with Valves)
© 2007 Grayledge Pump & Industrial
